The SH51 combined hooding machine in a single machine, hoods and heat-shrinks palletized products with tubular heat-shrinkable film. Messersì offers the best solution for the preparation, opening and positioning of the hoods, starting from the tubular film, with lateral blows together with quality heat shrinkage due to an innovative system with ring-shaped hot air generators.
Film used: Heat-shrinkable polyethylene with a thickness of 80 to 160 micron
Maximum coil diameter: 1000 mm
Type of gas used: Propane, methane
Gas supply pressure: 100 to 350 mbar
Gas consumption: Approximately 0.15 m3 (with propane)
Compressed air use pressure: 5 ÷ 7 bar
Compressed air consumption: 70 Nl/cycle
Supply voltage: 400 V+N+PE (+/-10%) – 50 Hz
Installed thermal power: (variable depending on machine configurations) around 310 kW
Optional
Lifting device
Automatic package height detector
The machine is also available with two or three, up to 6 rolls of film with different tubular in-line formats, to wrap packages of different sizes, also fed in casual sequences.
© 2024 Grupo Crest.
CRESTPACK is a brand managed by Eurotecsa International LLC.
All rights reserved.
Address:
224 North McColl Road, McAllen, Texas, 78501
Website development by: